SA537 Cl1, SA537 Cl1 steel, SA537 Cl1 steel plate
2013年8月28日 by admin
Adopt standard: ASME SA537
SA537 Cl1 steel plate is heat treated, Carbon- Manganese- Silicon Pressure Vessel plates.
The maximum thickness of plates furnished under100mm according to SA537 standard. But if you need larger thickness in SA537 Cl1, our mill also has a ability to produce for you because width and thickness plate are our advantage.
SA537 Cl1 steel plates shall be normalized in all of thickness. SA537 steel material usual be serviced the Gas, Petrochemical and Oil industry. If you need more yield and tensile grade, you could choose steel grade SA537 Cl2.
Gangsteel supply SA537 Cl1 plates directly from our mill in the competitive price from sales department. Each plate has the Mill Certificate Test EN 10204 3.1 or 3.2.
About SA537 Cl1 detail information, please check technical date in following.
The Chemical is max composition of product analysis:
| Grade | C % | Si % | Mn % | P % | S % | Cu % | Ni % |
| SA537 Cl1 | 0.240 | 0.13-0.55 | 0.64-1.46 | 0.035 | 0.035 | 0.380 | 0.280 |
The mechanical properties at ambient temperature for quenched and tempered steel plate:
| Grade | Thickness(mm) | Min Yield (Mpa) | Tensile(MPa) | Elongation (%) |
| SA537 Cl1 | 8mm-65mm | Min 345Mpa | 485-620Mpa | 22% |
| 66mm-100mm | Min 310Mpa | 450-585Mpa | 22% | |
| 101mm-150mm | A | A | A | |
| A mean that product is not available in this size range | ||||
Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25 | Z35 | S1 | S2 | S3 | S4.1
S5 | S6 | S7 | S8 | S9| S11 | S12 | S14 | S17
Our mill SA537 Cl1 always be exported to Jordan and the middle east city for tank and vessel.
For more information in quality certificate or inquiry in competitive official quotation, please contact us.
0 Comments, 0 Trackbacks